Our products
Hot Melt Glue Stick

Temperature resistant hot glue stick

Email to this supplier

Title:*
Name:*
Email:*
Content:*
 

This model is one slow solidification glue stick,Good adhesion strength,temperature resistant from -10℃ to 70℃,perfect and appropriate strength for various type of coating materials that are hard to be bond, such as PE coated, OPP coated, PP fluted board, PE foam, UV vanish coating materials.The most important this is one good quality with competitive price glue stick.



Edge banding, Handicrafts, Toys, Metal, Plastic,Paper Packaging, Ornaments,Carpentry computer peripherals, Automotive electrical components, Electronic parts, etc



1) Low&high heat resistance
2) Strong adhesion strength

3) Slow solidification


Use Hot melt glue gun 60-100W


★Preheat the equipment befor use
★Surface to be bonded should be clean,dry,free of loose particles.Wipe plastic and metal surfaces with solvent(eg.Acetone)
★Control well the speed of glue,the temperature of gun,turn off the power when no operation
★Apply firm pressure and do not adjust joint has been made.
★Joint the bond within open time for keeping optimum binding strength
★Melt System with high temperature,In order to avoid scald,please put on protective goggles and gloves when operation,do not use hand to touch.If scald,please put scald place immersion in water at least ten minutes,then go to hospital for further treatment.
★If substrates could be pre-warmed to 60℃ at least,eg metal surfaces,the stronger bond strengths will be achieved
★General hot melt glue achieve around 50% bond strength after 1 minute,and 75% strength after 1 hour;Smooth surfaces are more difficult to adhere than rough,or porous surfaces.

Store in a cool and dry place,out of direct sunlight,and prevent exposure to temperature extremes,best store temperature condition between 5℃ and 20℃.


Store in a cool and dry place,out of direct sunlight,and prevent exposure to temperature extremes,best store temperature condition between 5℃ and 20℃.


20KG/Carton,inside of carton with big polybag.