Our products
Hot Melt Glue Stick

Transparent hot melt glue stick

Email to this supplier

Title:*
Name:*
Email:*
Content:*
 

 Our hot melt glue can apply to all packaging:paper bag sealing, medical packaging bags, soap wrapping paper, bank note tying bags, dairy sealing, candy wrappers, etc. We have a  professional development team and can develop various hot melt glue according to customers’ needs for special requirements.

 

Can meet most the requirement of packaging machinery and production process, such as fast curing operation, long open time production process, heavy cartons packaging, or high temperature/ frozen products packaging, etc.   

 

This model is mainly use in paper case sealing/filling,Good apperance,low temperature resistance,fast solidication type.



Handicrafts, Paper packaging, toys, clothing, lighting accessories, electronic parts bonding, carton, carton sealing, sealing, plastic products, computer parts bonding, hair Jewelry, gifts and other jewelry bonding.



1) Excellent flexibility
2) Nice transparent apperance
3) High and low temperature resistance(From 15℃ to 75℃)



Article No.:

H318

Color:

transparent

Content:

EVA(Ethylene Vinyl Acetate)

Apperance:

Round glue stick

Diameter(Stick,MM)

7-11 ± 0.3MM, more than 11MM can be customized

Viscosity:(180℃,cps)

11000 ± 1500

Softening Point(℃)

85 ± 5

working time range(S):

65 ± 5

Setting time(S):

8-15

Operation Temp(℃):

160-180



Use the glue gun 60-100W



★Preheat the equipment befor use
★Surface to be bonded should be clean,dry,free of loose particles.Wipe plastic and metal surfaces with solvent(eg.Acetone)
★Control well the speed of glue,the temperature of gun,turn off the power when no operation
★Apply firm pressure and do not adjust joint has been made.
★Joint the bond within open time for keeping optimum binding strength
★Melt System with high temperature,In order to avoid scald,please put on protective goggles and gloves when operation,do not use hand to touch.If scald,please put scald place immersion in water at least ten minutes,then go to hospital for further treatment.
★If substrates could be pre-warmed to 60℃ at least,eg metal surfaces,the stronger bond strengths will be achieved
★General hot melt glue achieve around 50% bond strength after 1 minute,and 75% strength after 1 hour;Smooth surfaces are more difficult to adhere than rough,or porous surfaces.

Store in a cool and dry place,out of direct sunlight,and prevent exposure to temperature extremes,best store temperature condition between 5℃ and 20℃.


Best used within 24 months from date of manufacture when stored under the above conditions in the original unopened containers or packing.


25KG/Carton,inside of carton with big polybag.