Our products
Hot Melt Glue Pallets

Clear hot melt grain

Email to this supplier

Title:*
Name:*
Email:*
Content:*
 

This model is one high quality hot melt glue,top sales,High quality hot melt grain,Strong adhesion strength,low temperature resistant,can well adhere metal and plastic products.



◆General assembly: Metal products,Plastic products. All kinds of paper packing and sealing.General automatic carton and box sealing/ Middle and high waterproof carton and box sealing 
◆Packaging:All kinds of paper packing and sealing,EPE foam/sheet, various type of coating materials that are hard to be bond, such as PE coated, OPP coated, PP fluted board, PE foam, UV vanish coating materials
Decorations/ Toys/ Handcrafts/ Impact-absorbing materials/ Woodenware assembly/ General Assembly/ Lamination
Woodworking, edge banding、Profile wrapping



★ Stong binding strength
★ Good Temperature resistance
★ Non-yellowing
★ Excellent adhsesion performance


Item No.: RH510 Viscosity
(180℃,cps):
5000±1000
Description: Drops Softening Point(℃): 85±5
Color: Transparent Open time(S) 8-13
Main contents: EVA/Resin Setting time(S) 8-13
Operation Temperature(℃): 160-180




Use hotmelt glue gun 100-150W,Sprayer equipments


★Preheat the equipment befor use
★Surface to be bonded should be clean,dry,free of loose particles.Wipe plastic and metal surfaces with solvent(eg.Acetone)
★Control well the speed of glue,the temperature of gun,turn off the power when no operation
★Apply firm pressure and do not adjust joint has been made.
★Joint the bond within open time for keeping optimum binding strength
★Melt System with high temperature,In order to avoid scald,please put on protective goggles and gloves when operation,do not use hand to touch.If scald,please put scald place immersion in water at least ten minutes,then go to hospital for further treatment.
★If substrates could be pre-warmed to 60℃ at least,eg metal surfaces,the stronger bond strengths will be achieved
★General hot melt glue achieve around 50% bond strength after 1 minute,and 75% strength after 1 hour;Smooth surfaces are more difficult to adhere than rough,or porous surfaces.

Store in a cool and dry place,out of direct sunlight,and prevent exposure to temperature extremes,best store temperature condition between 5℃ and 20℃.


Best used within 24 months from date of manufacture when stored under the above conditions in the original unopened containers or packing.


25KG/Carton,inside of carton with big polybag.