Our products
Hot Melt Glue Stick

High quality hot melt glue stick

Email to this supplier

Title:*
Name:*
Email:*
Content:*
 

 EVA Hot Melt Adhesive has the advantage of wide range of adhesion,HJ all kinds of hot melt glue sticks with different diameters that can be used with various hot melt glue gun,Diameter from7MM to 25MM.

This model is our hot sale glue stick ,good low temperature resistance,strong adhesion strength,can well adhere metal and plastic materials.

◆Computer assembly,Lighting fittings,Electronic components,Auto parts& Accessories
◆Metal products, Plastic assembly,such as PE coated, OPP coated, PP fluted board, PE foam, UV vanish coating materials,Handicrafts,Toys,Decorations,All packaging

★)Good low temperature resistance(From-30℃ to +75℃)
★)Excellent adhension strength
★)Good flexible

Item No.: RH511 Viscosity
(180℃,cps):
11000±1500
Description: Glue stick Softening Point(℃): 85±5
Color: Semi-transparent Open time(S) 8-15
Diameter(MM): 7-25MM can be made Setting time(S) 10-15
Length(MM): 300MM,can be customized Operation Temp(℃): 160-180

Ues the glue gun with 60-100W


★Preheat the equipment before use
★Surface to be bonded should be clean,dry,free of loose particles.Wipe plastic and metal surfaces with solvent(eg.Acetone)
★Control well the speed of glue,the temperature of gun,turn off the power when no operation
★Apply firm pressure and do not adjust joint has been made.
★Joint the bond within open time for keeping optimum binding strength
★Melt System with high temperature,In order to avoid scald,please put on protective goggles and gloves when operation,do not use hand to touch.If scald,please put scald place immersion in water at least ten minutes,then go to hospital for further treatment.
★If substrates could be pre-warmed to 60℃ at least,eg metal surfaces,the stronger bond strengths will be achieved
★General hot melt glue achieve around 50% bond strength after 1 minute,and 75% strength after 1 hour;Smooth surfaces are more difficult to adhere than rough,or porous surfaces.

Store in a cool and dry place,out of direct sunlight,and prevent exposure to temperature extremes,best store temperature condition between 5℃ and 20℃.


Best used within 24 months from date of manufacture when stored under the above conditions in the original unopened containers or packing.


25KG/Carton,inside of carton with big polybag.