Our products
Bookbinding Hot Glue

Professional back bookbinding glue

Email to this supplier


Our factory' hot melt adhesive can be used in seamless binding for magazine, periodicals, catalogues, hardcover books and more. It can be used as back glue, side glue and other adhesion purposes.

This model back glue can adhere with different paper such as simili paper, recycled paper, copper paper and others. Our glue can achieve glue with high adhesive strength for better quality and more durable. Our books could be read and used for various environment, and White low odor hot melt is especially good for single binding machine, will create good working environment due to its low smell

We can develop customize spec for bookbinding adhesive,It is suitable for both fast and slow machine and can improve the production flow of your equipment. High adhesion strength can adhere to the copper paper and has a long open time as well. It will prevent pages from falling and is good for different temp. The glue will not crack during the cold weather, and will remain its hardness during high temp, as to keep books in good shape.

Bookbinding: Back glue for all kinds of paper book

★Strong binding strength
★Fast solidification
★Good temperature resistance

Item No.: RH563 Softening Point(℃): 80±3
Description: Glue slice Setting time(S): 4-10
Color: Cream white Operation Temp(℃): 150-170
6500±1500 Hardness: 65

Bookbinding machine/Auto-machine

1. Surface to be bonded should be clean,dry,free of loose particles.Wipe plastic and metal surfaces with solvent(eg.Acetone)
2. Smooth surfaces are more difficult to adhere than rough,or porous surfaces.
3. Joint as quickly as possible for keeping optimum binding strength.
4. Apply firm pressure and do not adjust joint has been made.
5. If substrates could be pre-warmed to 60℃ at least,eg metal surfaces,the stronger bond strengths will be achieved.
6. Opening and Curing time will changing along with the changes of Temperature Glue,Coating,Environmental
7. Melt System with high temperature,In order to avoid scald,please put on protective goggles and gloves when operation,do not use hand to touch.If scald,please put scald place immersion in water at least ten minutes,then go to hospital for further treatment.
8. General hot melt glue achieve around 50% bond strength after 1 minute,and 75% strength after 1 hour.

Store in a cool and dry place,out of direct sunlight,and prevent exposure to temperature extremes,best store temperature condition between 5℃ and 20℃.

Best used within 24 months from date of manufacture when stored under the above conditions in the original unopened containers or packing.